Neo4j to OrientDB Importer

The Neo4j to OrientDB Importer is a tool that can help you importing in a quick way a Neo4j graph database into OrientDB.

Imported Neo4j items are:

  • nodes
  • relationships
  • unique constraints
  • indexes

Neo4j and Cypher are registered trademark of Neo Technology, Inc.

Supported Versions

Currently, the Neo4j to OrientDB Importer supports, and has been tested with, the following versions:

  • OrientDB: 2.2.x, 3.0.x
  • Neo4j: 3.x

Limitations

The following limitations apply:

  • Currently only local migrations are allowed.
  • Schema limitations:
    • In case a node in Neo4j has multiple Labels, it will be imported into a single OrientDB Class ("MultipleLabelNeo4jConversion").
      • Note that the information about the original set of Labels is not lost but stored into an internal property of the imported vertex ("Neo4jLabelList"). As a result, it will be possible to query nodes with a specific Neo4j Label. Note also that the nodes imported into the single class "MultipleLabelNeo4jConversion" can then be moved to other Classes, according to your specific needs, using the MOVE VERTEX command. For more information, please refer to this Section.
    • Neo4j Nodes with same Label but different case, e.g. LABEL and LAbel will be aggregated into a single OrientDB vertex Class.
    • Neo4j Relationship with same name but different case, e.g. relaTIONship and RELATIONSHIP will be aggregated into a single OrientDB edge Class
    • Migration of Neo4j's "existence" constraints (only available in the Neo4j's Enterprise Edition) is currently not implemented.

Installation

The Neo4j to OrientDB Importer is provided as an external plugin for the OrientDB Server, and is available as a zip or tar.gz archive.

Please download the plugin from maven central:

http://central.maven.org/maven2/com/orientechnologies/orientdb-neo4j-importer/3.2.4/orientdb-neo4j-importer-3.2.4.tar.gz

Replace tar.gz with zip for the zip archive.

To install the plugin, please unpack the archive on your OrientDB server directory (please make sure that the version of your OrientDB server and the version of the Neo4j to OrientDB Importer are the same. Upgrade your OrientDB server, if necessary). On Linux systems, to unpack the archive you can use a command like the following:

tar xfv orientdb-neo4j-importer-3.2.4.tar.gz -C path_to_orientDB/ --strip-components=1

Migration Scenarios

A typical migration scenario consists of the following steps:

  • A copy of the Neo4j's database graph directory (typically graph.db) is created into a safe place
  • OrientDB is installed
  • The Neo4j to OrientDB Importer is installed
  • The migration process is started from the command line, passing to the Neo4j to OrientDB Importer the copy of the Neo4j's database directory created earlier
  • OrientDB (embedded or server) is started and the newly imported graph database can be used

Notes:

  • Since currently only exclusive, local, connections are allowed, during the migration there must be no running servers on the Neo4j's database directory and on the target OrientDB's import directory.

  • As an alternative of creating a copy of the Neo4j's database directory, and in case you can schedule a Neo4j shutdown, you can:

    • Shutdown your Neo4j Server
    • Start the migration by passing the original Neo4j's database directory to the Neo4j to OrientDB Importer (a good practice is to create a back-up first)

Usage

After Installation, the Neo4j to OrientDB Importer can be launched using the provided orientdb-neo4j-importer.sh script (or orientdb-neo4j-importer.bat for Windows systems).

Syntax

OrientDB-Neo4j-Importer
	-neo4jlibdir <neo4jlibdir> (mandatory)
	-neo4jdbdir <neo4jdbdir> (mandatory)
	[-odbdir <odbdir>]
    [-o true|false]
    [-i true|false]

Where:

  • neo4jlibdir (mandatory option) is the full path to the Neo4j lib directory (e.g. D:\neo4j\neo4j-community-3.0.7\lib). On Windows systems, this parameter must be the first passed parameter.

  • neo4jdbdir (mandatory option) is the full path to the Neo4j’s graph database directory (e.g. D:\neo4j\neo4j-community-3.0.7\data\databases\graph.db).

  • odbdir (optional) is the full path to a directory where the Neo4j database will be migrated. The directory will be created by the import tool. In case the directory exists already, the Neo4j to OrientDB Importer will behave accordingly to the value of the option o (see below). The default value of odbdir is $ORIENTDB_HOME/databases/neo4j_import.

  • o (optional). If true the odbdir directory will be overwritten, if it exists. If false and the odbdir directory exists, a warning will be printed and the program will exit. The default value of o is false.

  • i (optional). If true a unique index on the property Neo4jRelID will be created, for all migrated edge classes. This allows you to query relationships by original Neo4j relationship Ids. The default value of i is false.

If the Neo4j to OrientDB Importer is launched without parameters, it fails because -neo4jlibdir and -neo4jdbdir are mandatory.

Example

A typical import command looks like the following (please adapt the value of the -neo4jlibdir and -neo4jdbdir parameters to your specific case):

Windows:

orientdb-neo4j-importer.bat -neo4jlibdir="D:\neo4j\neo4j-community-3.0.7\lib" -neo4jdbdir="D:\neo4j\neo4j-community-3.0.7\data\databases\graph.db"

Linux / Mac:

./orientdb-neo4j-importer.sh -neo4jlibdir /mnt/d/neo4j/neo4j-community-3.0.7/lib -neo4jdbdir /mnt/d/neo4j/neo4j-community-3.0.7/data/databases/graph.db

Migration Details

Internally, the Neo4j to OrientDB Importer makes use of the Neo4j's java API to read the graph database from Neo4j and of the OrientDB's java API to store the graph into OrientDB.

The import consists of four phases:

  • Phase 1: Initialization of the Neo4j and OrientDB servers
  • Phase 2: Migration of nodes and relationships
  • Phase 3: Schema migration
  • Phase 4: Shutdown of the servers and summary info

General Migration Details

The following are some general migration details that is good to keep in mind:

  • During the import, OrientDB's WAL and WAL_SYNC_ON_PAGE_FLUSH are disabled, and OrientDB is prepared for massive inserts (OIntentMassiveInsert).

  • In case a node in Neo4j has no Label, it will be imported in OrientDB into the Class "GenericClassNeo4jConversion".

  • Starting from version 2.2.14, in case a node in Neo4j has multiple Labels, it will be imported into the Class "MultipleLabelNeo4jConversion". Before 2.2.14, only the first Label was imported.

  • List of original Neo4j Labels are stored as properties in the imported OrientDB vertices (property: "Neo4jLabelList").

  • During the import, a not unique index is created on the property "Neo4jLabelList". This allows you to query by Label even over nodes migrated into the single Class "MultipleLabelNeo4jConversion", using queries like: SELECT FROM V WHERE Neo4jLabelList CONTAINS 'your_label_here' or the equivalent with the MATCH syntax: MATCH {class: V, as: your_alias, where: (Neo4jLabelList CONTAINS 'your_label'} RETURN your_alias.

  • Original Neo4j IDs are stored as properties in the imported OrientDB vertices and edges (Neo4jNodeID for vertices and Neo4jRelID for edges). Such properties can be (manually) removed at the end of the import, if not needed.

  • During the import, an OrientDB index is created on the property Neo4jNodeID for all imported vertex classes (node's Labels in Neo4j). This is to speed up vertices lookup during edge creation. The created indexes can be (manually) removed at the end of the import, if not needed.

  • In case a Neo4j Relationship has the same name of a Neo4j Label, e.g. "RelationshipName", the Neo4j to OrientDB Importer will import that relationship into OrientDB in the class E_RelationshipName (i.e. prefixing the Neo4j's RelationshipType with an E_).

  • During the creation of properties in OrientDB, Neo4j Char data type is mapped to a String data type.

Details on Schema Migration

The following are some schema-specific migration details that is good to keep in mind:

  • If in Neo4j there are no constraints or indexes, and if we exclude the properties and indexes created for internal purposes (Neo4jNodeID, Neo4jRelID, Neo4jLabelList and corresponding indexes), the imported OrientDB database is schemaless.

  • If in Neo4j there are constraints or indexes, the imported OrientDB database is schema-hybrid (with some properties defined). In particular, for any constraint and index:

    • The Neo4j property where the constraint or index is defined on, is determined.

    • A corresponding property is created in OrientDB (hence the schema-hybrid mode).

  • If a Neo4j unique constraint is found, a corresponding unique index is created in OrientDB

    • In case the creation of the unique index fails, a not unique index will be created. Note: this scenario can happen, by design, when migrating nodes that have multiple Labels, as they are imported into a single vertex Class).

  • If a Neo4j index is found, a corresponding (not unique) OrientDB index is created.

Migration Best Practices

Below some migration best practices.

  1. Check if you are using Labels with same name but different case, e.g. LABEL and LAbel and if you really need them. If the correct Label is Label, change LABEL and LAbel to Label in the original Neo4j database before the import. If you really cannot change them, be aware that with the current version of the Neo4j to OrientDB Importer such nodes will be aggregated into a single OrientDB vertex Class.

  2. Check if you are using relationships with same name but different case, e.g. relaTIONship and RELATIONSHIP and if you really need them. If the correct relationship is Relationship, change relaTIONship and RELATIONSHIP to Relationship before the import. If you really cannot change them, be aware that with the current version of the Neo4j to OrientDB Importer such relationships will be aggregated into a single OrientDB edge Class.

  3. Check your constraints and indexes before starting the import. Sometime you have more constraints or indexes than needed, e.g. old ones that you created on Labels that you are not using anymore. These constraints will be migrated as well, so a best practice is to check that you have defined, in Neo4j, only those that you really want to import. To check constraints and indexes in Neo4j, you can type :schema in the Browser and then click on the "play" icon. Please delete the not needed items.

  4. Check if you are using nodes with multiple Labels, and if you really need more than one Label on them. Be aware that with current version of the Neo4j to OrientDB Importer such nodes with multiple Labels will be imported into a single OrientDB Class ("MultipleLabelNeo4jConversion").

Migration Log

During the migration, a log file is created.

The log can be found at path_to_orientDB/log/orientdb-neo4j-importer.log.

Migration Monitoring

During the migration, for each imported Neo4j items (nodes, relationships, constraints and indexes) a completion percentage is written in the shell from where the import has been started, thus allowing to monitor progresses.

For large imports, a best practice is to monitor also the produced import log, using a program like tail, e.g.

tail -f -n 100 -f path_to_orientDB/log/orientdb-neo4j-importer.log

Migration Troubleshooting

In case of problems, the details of the occurred errors are written in the migration log file. Please use this file to troubleshoot the migration.

Connecting to the newly imported Database

After the migration process, you may start an OrientDB server using the server.sh or server.bat scripts.

You can connect to the newly imported database through Studio or the Console using the OrientDB's default database users, e.g. using the user admin and password admin.

Please secure your database by removing the default users, if you don't need them, or by creating new users.

For further information on using OrientDB, please refer to the Getting Started Guide.

Query Strategies

This section includes a few strategies that you can use to query your data after the import.

As first thing, please be aware that in OrientDB you can query your data using both SQL or pattern matching. In case you are familiar with Neo4j's Cypher query language, it may be more easy for you to use our pattern matching (see our MATCH syntax for more details). However, keep in mind that depending on your specific use case, our SQL can be of great help.

Counting all nodes

To count all nodes (vertices):

Neo4j's Cypher OrientDB's SQL 
MATCH (n) RETURN count(n)

SELECT COUNT(*) FROM V

Counting all relationships

To count all relationships (edges):

Neo4j's Cypher OrientDB's SQL 
MATCH ()-->() RETURN count(*)

SELECT COUNT(*) FROM E

Querying nodes by original Neo4j ID

If you would like to query nodes by their original Neo4j Node ID, you can use the property Neo4jNodeID, which is created automatically for you during the import, and indexed as well.

To query a node that belongs to a specific Class with name ClassName, you can execute a query like:

SELECT FROM ClassName WHERE Neo4jNodeID = your_id_here

To query a node regardless of the Class where it has been included in, you can use a query like:

SELECT FROM V WHERE Neo4jNodeID = your_id_here

Querying relationships by original Neo4j ID

The strategy to query relationships by their original Neo4j Relationship ID, will be improved in the next hotfix (see GitHub Issue #9, which also includes a workaround).

Querying nodes by original Neo4j Labels

In case the original nodes have just one Label, they will be migrated in OrientDB into a Class that has name equals to the Neo4j's Label name. In this simple case, to query nodes by Label you can execute a query like the following:

Neo4j's Cypher OrientDB's SQL 
MATCH (n:LabelName) RETURN n

SELECT FROM LabelName

or using our MATCH syntax:

MATCH {class: LabelName, as: n} RETURN n

More generally speaking, since the original Neo4j Label is stored inside the property Neo4jLabelList, to query imported nodes (vertices) using their original Neo4j Label, you can use queries like the following:

Neo4j's Cypher OrientDB's SQL 
MATCH (n:LabelName) RETURN n

SELECT * FROM V WHERE Neo4jLabelList CONTAINS 'LabelName'

or using our MATCH syntax:

MATCH {class: V, as: n, where: (Neo4jLabelList CONTAINS 'LabelName')} RETURN n

This is, in particular, the strategy that must be followed in case the original Neo4j's nodes have multiple Labels (and are hence migrated into the single OrientDB Class MultipleLabelNeo4jConversion).

Note that the property Neo4jLabelList has an index on it.

Migration Example

A complete example of a migration from Neo4j to OrientDB using the Neo4j to OrientDB Importer can be found in the section Tutorial: Importing the northwind Database from Neo4j.

Roadmap

A list of prioritized enhancements for the Neo4j to OrientDB Importer, along with some other project information can be found here.

FAQ

1. In case original nodes in Neo4j have multiple Labels, they are imported into a single OrientDB vertex Class. Depending on the specific use case, after the migration, it may be useful to manually move vertices to other Classes. How can this be done?

First, please note that there is an open enhancement request about having a customized mapping between Neo4j Labels and OrientDB Classes. Until it is implemented, a possible strategy to quickly move vertices into other Classes is to use the MOVE VERTEX syntax.

The following are the steps to follow:

A - Create the Classes where you want to move the vertices.

When creating the Classes, please keep in mind the following:

  • Define the following properties:
    • Neo4jNodeID of type LONG
    • Neo4jLabelList of type EmbeddedList String

Example:

CREATE CLASS YourNewClassHere EXTENDS V
CREATE PROPERTY YourNewClassHere.Neo4jNodeID LONG 
CREATE PROPERTY YourNewClassHere.Neo4jLabelList EMBEDDEDLIST STRING

B - Select all vertices that have a specific Neo4j Label, and then move them to your new Class. To do this you can use a query like:

MOVE VERTEX (
  SELECT FROM MultipleLabelNeo4jConversion 
    WHERE Neo4jLabelList CONTAINS 'Your Neo4j Label here'
  ) 
TO CLASS:YourNewClassHere BATCH 10000

(use a batch size appropriate to your specific case).

C - Create the following indexes in your new Classes:

  • A unique index on the property Neo4jNodeID
  • A not unique index on the property Neo4jLabelList

Important: creation of the indexes above is crucial in case you will want to query vertices using their original Neo4j node IDs or Labels.

Example:

CREATE INDEX YourNewClassHere.Neo4jNodeID ON YourNewClassHere(Neo4jNodeID) UNIQUE
CREATE INDEX YourNewClassHere.Neo4jLabelList ON YourNewClassHere(Neo4jLabelList) NOTUNIQUE

2. Not all constraints have been imported. Why?

By design, there are certain cases where not all the constraints can be imported. It may be that you are in one of these cases. When nodes are aggregated into a single Class (either because that node has multiple Labels or because there are Labels with the same name but different case, e.g. LABEL and LAbel) not all constraints can be imported: the creation of unique indices in OrientDB will probably fail; as a workaround the Importer will try to create not unique indexes, but when aggregating nodes into a single Class, number of created constraints will be probably less than number of constraints in Neo4j, even after the creation of the not unique indexes. This in general may or may not be a problem depending on your specific case. Please feel free to open an issue if you believe you incurred into a bug.